We are Permanently Move to www.VUpk.net Please Join us there.

CS302 Final term Paper Solved 2010 - 3

Saturday 4 August 2012
FINALTERM  EXAMINATION
Spring 2010
CS302- Digital Logic Design 

Time: 90 min
M a r k s: 58
    
Question No: 1    ( M a r k s: 1 )    http://vuzs.net
  
A 8-bit serial in / parallel out shift register contains the value “8”, _____ clock signal(s) will be required to shift the value completely out of the register.
       1
       2
       4
       8
   
Question No: 2    ( M a r k s: 1 )    http://vuzs.net
  
A frequency counter ______________

       Counts pulse width

       Counts no. of clock pulses in 1 second

       Counts high and low range of given clock pulse

       None of given options

Question No: 3    ( M a r k s: 1 )    http://vuzs.net
 
In a sequential circuit the next state is determined by ________ and _______

       State variable, current state
       Current state, flip-flop output
       Current state and external input
       Input and clock signal applied

Question No: 4    ( M a r k s: 1 )    http://vuzs.net
 
 The divide-by-60 counter in digital clock is implemented by using two cascading counters:
       Mod-6, Mod-10
       Mod-50, Mod-10
       Mod-10, Mod-50
       Mod-50, Mod-6
   
Question No: 5    ( M a r k s: 1 )    http://vuzs.net
 
 In NOR gate based S-R latch if both S and R inputs are set to logic 0, the previous output state is maintained.

       True
       False
   
Question No: 6    ( M a r k s: 1 )    http://vuzs.net
  
Flip flops are also called _____________
       Bi-stable dualvibrators
       Bi-stable transformer
       Bi-stable multivibrators
       Bi-stable singlevibrators
   
Question No: 7    ( M a r k s: 1 )    http://vuzs.net
  
The minimum time for which the input signal has to be maintained at the input of flip-flop is called ______ of the flip-flop.

       Set-up time
       Hold time
       Pulse Interval time
       Pulse Stability time (PST)

   
Question No: 8    ( M a r k s: 1 )    http://vuzs.net
 
74HC163 has two enable input pins which are _______ and _________

       ENP, ENT

       ENI, ENC

       ENP, ENC

       ENT, ENI

   
Question No: 9    ( M a r k s: 1 )    http://vuzs.net
 ____________ is said to occur when multiple internal variables change due to change in one input variable
       Clock Skew
       Race condition
       Hold delay

       Hold and Wait

   
Question No: 10    ( M a r k s: 1 )    http://vuzs.net
  
Given the state diagram of an up/down counter, we can find __________


       The next state of a given present state
       The previous state of a given present state
       Both the next and previous states of a given state
       The state diagram shows only the inputs/outputs of a given states
    
 Question No: 11    ( M a r k s: 1 )    http://vuzs.net
  
The _____________ input overrides the ________ input
       Asynchronous, synchronous
       Synchronous, asynchronous
       Preset input (PRE), Clear input (CLR)
       Clear input (CLR), Preset input (PRE)


   
Question No: 12    ( M a r k s: 1 )    http://vuzs.net
  
A logic circuit with an output  consists of ________.


       two AND gates, two OR gates, two inverters
       three AND gates, two OR gates, one inverter
       two AND gates, one OR gate, two inverters
       two AND gates, one OR gate

   
Question No: 13    ( M a r k s: 1 )    http://vuzs.net
A decade counter is __________.
       Mod-3 counter
       Mod-5 counter
       Mod-8 counter

       Mod-10 counter


Question No: 14    ( M a r k s: 1 )    http://vuzs.net
  
In asynchronous transmission when the transmission line is idle, _________


       It is set to logic low
       It is set to logic high
       Remains in previous state
       State of transmission line is not used to start transmission
   
Question No: 15    ( M a r k s: 1 )    http://vuzs.net
  
A Nibble consists of _____ bits


       2

       4
       8
       16
   
Question No: 16    ( M a r k s: 1 )    http://vuzs.net
  
The output of this circuit is always ________.

       1
       0
       A
      
   
Question No: 17    ( M a r k s: 1 )    http://vuzs.net
 
 Excess-8 code assigns _______ to “-8”

       ► 1110
       ► 1100
       ► 1000
       ► 0000

   
Question No: 18    ( M a r k s: 1 )    http://vuzs.net
 
The voltage gain of the Inverting Amplifier is given by the relation ________


       Vout / Vin = - Rf / Ri
       Vout / Rf = - Vin / Ri
       Rf / Vin = - Ri / Vout
       Rf / Vin =   Ri / Vout

   
Question No: 19    ( M a r k s: 1 )    http://vuzs.net
  
LUT is acronym for _________


       Look Up Table
       Local User Terminal
       Least Upper Time Period
       None of given options
   
Question No: 20    ( M a r k s: 1 )    http://vuzs.net
  
DRAM stands for __________


       Dynamic RAM
       Data RAM
       Demoduler RAM
       None of given options
   
Question No: 21    ( M a r k s: 1 )    http://vuzs.net
  
The three fundamental gates are ___________

       ► AND, NAND, XOR
       ► OR, AND, NAND
       ► NOT, NOR, XOR
       ► NOT, OR, AND
   


   
Question No: 22    ( M a r k s: 1 )    http://vuzs.net
 
Which of the following statement is true regarding above block diagram ?
       Triggering takes place on the negative-going edge of the CLK pulse
       Triggering takes place on the positive-going edge of the CLK pulse
       Triggering can take place anytime during the HIGH level of the CLK waveform
       Triggering can take place anytime during the LOW level of the CLK waveform
   
Question No: 23    ( M a r k s: 1 )    http://vuzs.net
 
   
The total amount of memory that is supported by any digital system depends upon ______


       The organization of memory
       The structure of memory
       The size of decoding unit
       The size of the address bus of the microprocessor

Question No: 24    ( M a r k s: 1 )    http://vuzs.net
  
The expression F=A+B+C describes the operation of three bits _____ Gate.

       ► OR
       ► AND
       ► NOT
       ► NAND
   
Question No: 25    ( M a r k s: 1 )    http://vuzs.net
  
Stack is an acronym for _________

       FIFO memory
       LIFO memory
       Flash Memory
       Bust Flash Memory
   
Question No: 26    ( M a r k s: 1 )    http://vuzs.net
  
Addition of two octal numbers “36” and “71” results in ________

       213
       123
       127
       345


   
Question No: 27    ( M a r k s: 2 )
  
Define quantization process.




    
Question No: 28    ( M a r k s: 2 )
Explain the difference between 1-to-4 Demultiplexer and 2-to-4 Binary Decoder? 

Question No: 29    ( M a r k s: 2 )
 
A general Sequential circuit consists of a combinational circuit and a memory element. How this memory element is implemented

Question No: 30    ( M a r k s: 2 )
 
Suppose a 2 bit up-counter, having states A, B, C, D. Write down GOTO statements to show how present states change to next states.

Question No: 31    ( M a r k s: 3 )
  
Name three Operations that can be performed on FLASH Memory

   
Question No: 32    ( M a r k s: 3 )
  
Explain Rotate Right Operation of shift register with the help of diagram.
    
Question No: 33    ( M a r k s: 3 )
 

You are given the block diagram of 74HC190 integrated circuit up/down counter, explain the function of labeled inputs/outputs.


Question No: 34    ( M a r k s: 5 )
 
 Draw the state diagram of 3-bit up-down counter, use an external input X, when X sets to logic 1, the counter counts downwards, otherwise upward.
   
Question No: 35    ( M a r k s: 5 )
 Differentiate between synchronous and asynchronous RAM.
Question No: 36    ( M a r k s: 5 )
Explain Memory Select or Enable Signals

0 comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...