We are Permanently Move to www.VUpk.net Please Join us there.
Showing posts with label CS302. Show all posts
Showing posts with label CS302. Show all posts

CS302 Assignments Fall 2011

Sunday, 12 August 2012

CS302 Final term Paper subjective july 2012

Saturday, 4 August 2012

CS302 - Digital Logic Design Finalterm Subjective Paper July 2012


Total Questions: 52
Total Marks: 80
Questions & Marks Division:-
40 MCQs*1 Mark, 4*2 Marks, 4*3 Marks, 4*5 Marks.
  • Question 41:- Explain state assignment process (2).
  • Question 42:- How many bytes will be in 16K × 8 memory? (2)
  • Question 43:- Explain erase operation in context of FLASH Memory. (2)
  • Question 44:- Which of the following is DIGITAL & which is ANALOG? (2)
               a) Pressure in a bike’s tire
               b) Temperature
               c) Speed of a car
               d) Number of students in a class
  • Question 45:- Define “excitation inputs(3).
  • Question 46:- Explain rotate Right Operation of shift register with the help of diagram. (3)
  • Question 47:- Divide the following binary number “1101” by the binary number “101”. Write
  • all the steps. (3)
  • Question 48:- What are the three operations of FLASH MEMORY? (3)
  • Question 49:- Convert the following caveman number system into decimal number system. (5)
            i)Ω↑∑
             ii)↑∆∆∑
  • Question 50:- Differentiate between “MEMORY CPACITY” & “MEMORY DENSITY (5).
  • Question 51:- Draw next-state table of an UP-Counter with help of J-K flip-flop. (5)
  • Question 52:- Explain FLASH Analogue-to-Digital converter. (5)

CS302 Final term Paper Solved Subjective by MOAAZ

CS302- Digital Logic Design Solved Subjective from Finalterm Papers

Solved & Shared by Moaaz Siddiq

Attachments:
Download this file (CS302-FINALTERM-SOLVED-SUBJECTIVE-BY-MOAAZ.pdf)CS302-FINALTERM-SOLVED-SUBJECTIVE-BY-MOAAZ[]356 Kb

CS302 Final term Papers MCQs by MOAAZ

CS302- Digital Logic Design Solved MCQs from Finalterm Papers

Solved & Shared by Moaaz Siddiq

Attachments:
Download this file (CS302-FINALTERM-SOLVED-MCQ-BY-MOAAZ.pdf)CS302-FINALTERM-SOLVED-MCQ-BY-MOAAZ[ ]477 Kb

CS302 Final term Paper 2011 - 1

FINALTERM EXAMINATION
Spring 2011
CS302- Digital Logic Design

Total 52 questions
40 MCQs
Question No: 1   ( M a r k s: 1 )   http://vuzs.net
A 8-bit serial in / parallel out shift register contains the value “8”, _____ clock signal(s) will be required to shift the value completely out of the register.
       ► 1
       ► 2
       ► 4
       ► 8
Question No: 2   ( M a r k s: 1 )   http://vuzs.net
In a sequential circuit the next state is determined by ________ and _______
       ► State variable, current state
       ► Current state, flip-flop output
      ► Current state and external input
       ► Input and clock signal applied
Question No: 3   ( M a r k s: 1 )   http://vuzs.net
The divide-by-60 counter in digital clock is implemented by using two cascading counters:
       ► Mod-6, Mod-10
       ► Mod-50, Mod-10
       ► Mod-10, Mod-50
       ► Mod-50, Mod-6
  
Question No: 4   ( M a r k s: 1 )   http://vuzs.net
In NOR gate based S-R latch if both S and R inputs are set to logic 0, the previous output state is maintained.
       ► True
      ► False
Question No: 5   ( M a r k s: 1 )   http://vuzs.net
The minimum time for which the input signal has to be maintained at the input of flip-flop is called ______ of the flip-flop.
       ► Set-up time
       ► Hold time
       ► Pulse Interval time
       ► Pulse Stability time (PST)
Question No: 6   ( M a r k s: 1 )   http://vuzs.net
74HC163 has two enable input pins which are _______ and _________
       ► ENP, ENT
       ► ENI, ENC
       ► ENP, ENC
       ► ENT, ENI
Question No: 7   ( M a r k s: 1 )   http://vuzs.net
____________ is said to occur when multiple internal variables change due to change in one input variable
       ► Clock Skew
       ► Race condition
       ► Hold delay
       ► Hold and Wait
Question No: 8   ( M a r k s: 1 )   http://vuzs.net
The _____________ input overrides the ________ input
       ► Asynchronous, synchronous
       ► Synchronous, asynchronous
       ► Preset input (PRE), Clear input (CLR)
       ► Clear input (CLR), Preset input (PRE)

Question No: 9   ( M a r k s: 1 )   http://vuzs.net
A decade counter is __________.
       ► Mod-3 counter
       ► Mod-5 counter
       ► Mod-8 counter
       ► Mod-10 counter
Question No: 10   ( M a r k s: 1 )   http://vuzs.net
In asynchronous transmission when the transmission line is idle, _________
       ► It is set to logic low
       ► It is set to logic high
       ► Remains in previous state
       ► State of transmission line is not used to start transmission
Question No: 11   ( M a r k s: 1 )   http://vuzs.net
A Nibble consists of _____ bits
       ► 2
       ► 4
       ► 8
       ► 16
Question No: 12   ( M a r k s: 1 )   http://vuzs.net
The output of this circuit is always ________.
       ► 1
       ► 0
       ► A
       ►
Question No: 13   ( M a r k s: 1 )   http://vuzs.net
Excess-8 code assigns _______ to “-8”
       ► 1110
       ► 1100
       ► 1000
       ► 0000
  
Question No: 14   ( M a r k s: 1 )   http://vuzs.net
The voltage gain of the Inverting Amplifier is given by the relation ________
       ► Vout / Vin = - Rf / Ri
       ► Vout / Rf = - Vin / Ri
       ► Rf / Vin = - Ri / Vout
       ► Rf / Vin =   Ri / Vout
Question No: 15   ( M a r k s: 1 )   http://vuzs.net
LUT is acronym for _________
       ► Look Up Table
       ► Local User Terminal
       ► Least Upper Time Period
       ► None of given options
  
Question No: 16   ( M a r k s: 1 )   http://vuzs.net
The three fundamental gates are ___________
       ► AND, NAND, XOR
       ► OR, AND, NAND
       ► NOT, NOR, XOR
       ► NOT, OR, AND
Question No: 17   ( M a r k s: 1 )   http://vuzs.net
The total amount of memory that is supported by any digital system depends upon ______
     ► The organization of memory
       ► The structure of memory
       ► The size of decoding unit
       ► The size of the address bus of the microprocessor
Question No: 18   ( M a r k s: 1 )   http://vuzs.net
Stack is an acronym for _________
       ► FIFO memory
       ► LIFO memory
       ► Flash Memory
       ► Bust Flash Memory
Question No: 19   ( M a r k s: 1 )   http://vuzs.net
Addition of two octal numbers “36” and “71” results in ________
       ► 213
       ► 123
       ► 127
     ► 345
   Question No: 20    ( M a r k s: 1 )    http://vuzs.net
 ___________ is one of the examples of synchronous inputs.
       ► J-K input
       ► EN input
       ► Preset input (PRE)
       ► Clear Input (CLR)

Question No: 21    ( M a r k s: 1 )    http://vuzs.net
 __________occurs when the same clock signal arrives at different times at different clock inputs due to propagation delay.
       ► Race condition
       ► Clock Skew
       ► Ripple Effect
       ► None of given options
   Question No: 22    ( M a r k s: 1 )    http://vuzs.net
 Consider an up/down counter that counts between 0 and 15, if external input(X) is “0” the counter counts upward (0000 to 1111) and if external input (X) is “1” the counter counts downward (1111 to 0000), now suppose that the present state is “1100” and X=1, the next state of the counter will be ___________
        ► 0000
       ► 1101
       ► 1011
       ► 1111
Question No: 23    ( M a r k s: 1 )    http://vuzs.net
 In a state diagram, the transition from a current state to the next state is determined by
       ► Current state and the inputs
       ► Current state and outputs
       ► Previous state and inputs
       ► Previous state and outputs
   Question No: 24    ( M a r k s: 1 )    http://vuzs.net
 ________ is used to simplify the circuit that determines the next state.
       ► State diagram
       ► Next state table
       ► State reduction
       ► State assignment
Question No: 25    ( M a r k s: 1 )    http://vuzs.net
 A 8-bit serial in / parallel out shift register contains the value “8”, _____ clock signal(s) will be required to shift the value completely out of the register.
       ► 1
       ► 2
       ► 4
       ► 8
   Question No: 26    ( M a r k s: 1 )    http://vuzs.net
 Assume that a 4-bit serial in/serial out shift register is initially clear. We wish to store the nibble 1100. What will be the 4-bit pattern after the second clock pulse? (Right-most bit first.)
       ► 1100
       ► 0011
       ► 0000
       ► 1111
Question No: 27    ( M a r k s: 1 )    http://vuzs.net
 LUT is acronym for _________
        ► Look Up Table
       ► Local User Terminal
       ► Least Upper Time Period
       ► None of given options
. Question No: 28    ( M a r k s: 1 )    http://vuzs.net
 The diagram given below represents __________
       ► Demorgans law
       ► Associative law
       ► Product of sum form
       ► Sum of product form
Question No: 29    ( M a r k s: 1 )    http://vuzs.net
 The operation of J-K flip-flop is similar to that of the SR flip-flop except that the J-K flip-flop ___________
       ► Doesn’t have an invalid state
       ► Sets to clear when both J = 0 and K = 0
       ► It does not show transition on change in pulse
       ► It does not accept asynchronous inputs
Question No: 30    ( M a r k s: 1 )    http://vuzs.net
A multiplexer with a register circuit converts _________
       ► Serial data to parallel
       ► Parallel data to serial
       ► Serial data to serial
       ► Parallel data to parallel
Question No: 31    ( M a r k s: 1 )    http://vuzs.net
 A GAL is essentially a ________.
       ► Non-reprogrammable PAL
       ► PAL that is programmed only by the manufacturer
        ► Very large PAL
       ► Reprogrammable PAL
Question No: 32    ( M a r k s: 1 )    http://vuzs.net
in ____________, all the columns in the same row are either read or written.
       ► Sequential Access
       ► MOS Access
       ► FAST Mode Page Access
       ► None of given options
   Question No: 33    ( M a r k s: 1 )    http://vuzs.net
 In order to synchronize two devices that consume and produce data at different rates, we can use _________
        ► Read Only Memory
       ► Fist In First Out Memory
       ► Flash Memory
       ► Fast Page Access Mode Memory
Question No: 34   ( M a r k s: 1 )   http://vuzs.net
A positive edge-triggered flip-flop changes its state when   ________________
       ► Low-to-high transition of clock
       ► High-to-low transition of clock
       ► Enable input (EN) is set
       ► Preset input (PRE) is set
 Question No:     ( M a r k s: 2 )
 Write down at least two applications of a shiftregister.
Question No:   ( M a r k s: 2 )
Explain memory expansion process.
Question No:    ( M a r k s: 2 )
 Draw the NOR based S-R Latch

Question No:   ( M a r k s: 3 )
Explain Rotate Left Right Operation with the help of diagram.
Question No:   ( M a r k s: 3 )
You are given the block diagram of 74HC190 integrated circuit up/down counter, explain the function of labeled inputs/outputs.
Question No:   ( M a r k s: 5 )
Explain Memory Select or Enable Signals

Question No:   ( M a r k s: 5 )
Explain the implementation of First In First Out (FIFO) Memory by using RAM.
Question No:   ( M a r k s: 5 )
Explain application of demultiplexer

CS302 Final term Paper Solved 2010 - 3

FINALTERM  EXAMINATION
Spring 2010
CS302- Digital Logic Design 

Time: 90 min
M a r k s: 58
    
Question No: 1    ( M a r k s: 1 )    http://vuzs.net
  
A 8-bit serial in / parallel out shift register contains the value “8”, _____ clock signal(s) will be required to shift the value completely out of the register.
       1
       2
       4
       8
   
Question No: 2    ( M a r k s: 1 )    http://vuzs.net
  
A frequency counter ______________

       Counts pulse width

       Counts no. of clock pulses in 1 second

       Counts high and low range of given clock pulse

       None of given options

Question No: 3    ( M a r k s: 1 )    http://vuzs.net
 
In a sequential circuit the next state is determined by ________ and _______

       State variable, current state
       Current state, flip-flop output
       Current state and external input
       Input and clock signal applied

Question No: 4    ( M a r k s: 1 )    http://vuzs.net
 
 The divide-by-60 counter in digital clock is implemented by using two cascading counters:
       Mod-6, Mod-10
       Mod-50, Mod-10
       Mod-10, Mod-50
       Mod-50, Mod-6
   
Question No: 5    ( M a r k s: 1 )    http://vuzs.net
 
 In NOR gate based S-R latch if both S and R inputs are set to logic 0, the previous output state is maintained.

       True
       False
   
Question No: 6    ( M a r k s: 1 )    http://vuzs.net
  
Flip flops are also called _____________
       Bi-stable dualvibrators
       Bi-stable transformer
       Bi-stable multivibrators
       Bi-stable singlevibrators
   
Question No: 7    ( M a r k s: 1 )    http://vuzs.net
  
The minimum time for which the input signal has to be maintained at the input of flip-flop is called ______ of the flip-flop.

       Set-up time
       Hold time
       Pulse Interval time
       Pulse Stability time (PST)

   
Question No: 8    ( M a r k s: 1 )    http://vuzs.net
 
74HC163 has two enable input pins which are _______ and _________

       ENP, ENT

       ENI, ENC

       ENP, ENC

       ENT, ENI

   
Question No: 9    ( M a r k s: 1 )    http://vuzs.net
 ____________ is said to occur when multiple internal variables change due to change in one input variable
       Clock Skew
       Race condition
       Hold delay

       Hold and Wait

   
Question No: 10    ( M a r k s: 1 )    http://vuzs.net
  
Given the state diagram of an up/down counter, we can find __________


       The next state of a given present state
       The previous state of a given present state
       Both the next and previous states of a given state
       The state diagram shows only the inputs/outputs of a given states
    
 Question No: 11    ( M a r k s: 1 )    http://vuzs.net
  
The _____________ input overrides the ________ input
       Asynchronous, synchronous
       Synchronous, asynchronous
       Preset input (PRE), Clear input (CLR)
       Clear input (CLR), Preset input (PRE)


   
Question No: 12    ( M a r k s: 1 )    http://vuzs.net
  
A logic circuit with an output  consists of ________.


       two AND gates, two OR gates, two inverters
       three AND gates, two OR gates, one inverter
       two AND gates, one OR gate, two inverters
       two AND gates, one OR gate

   
Question No: 13    ( M a r k s: 1 )    http://vuzs.net
A decade counter is __________.
       Mod-3 counter
       Mod-5 counter
       Mod-8 counter

       Mod-10 counter


Question No: 14    ( M a r k s: 1 )    http://vuzs.net
  
In asynchronous transmission when the transmission line is idle, _________


       It is set to logic low
       It is set to logic high
       Remains in previous state
       State of transmission line is not used to start transmission
   
Question No: 15    ( M a r k s: 1 )    http://vuzs.net
  
A Nibble consists of _____ bits


       2

       4
       8
       16
   
Question No: 16    ( M a r k s: 1 )    http://vuzs.net
  
The output of this circuit is always ________.

       1
       0
       A
      
   
Question No: 17    ( M a r k s: 1 )    http://vuzs.net
 
 Excess-8 code assigns _______ to “-8”

       ► 1110
       ► 1100
       ► 1000
       ► 0000

   
Question No: 18    ( M a r k s: 1 )    http://vuzs.net
 
The voltage gain of the Inverting Amplifier is given by the relation ________


       Vout / Vin = - Rf / Ri
       Vout / Rf = - Vin / Ri
       Rf / Vin = - Ri / Vout
       Rf / Vin =   Ri / Vout

   
Question No: 19    ( M a r k s: 1 )    http://vuzs.net
  
LUT is acronym for _________


       Look Up Table
       Local User Terminal
       Least Upper Time Period
       None of given options
   
Question No: 20    ( M a r k s: 1 )    http://vuzs.net
  
DRAM stands for __________


       Dynamic RAM
       Data RAM
       Demoduler RAM
       None of given options
   
Question No: 21    ( M a r k s: 1 )    http://vuzs.net
  
The three fundamental gates are ___________

       ► AND, NAND, XOR
       ► OR, AND, NAND
       ► NOT, NOR, XOR
       ► NOT, OR, AND
   


   
Question No: 22    ( M a r k s: 1 )    http://vuzs.net
 
Which of the following statement is true regarding above block diagram ?
       Triggering takes place on the negative-going edge of the CLK pulse
       Triggering takes place on the positive-going edge of the CLK pulse
       Triggering can take place anytime during the HIGH level of the CLK waveform
       Triggering can take place anytime during the LOW level of the CLK waveform
   
Question No: 23    ( M a r k s: 1 )    http://vuzs.net
 
   
The total amount of memory that is supported by any digital system depends upon ______


       The organization of memory
       The structure of memory
       The size of decoding unit
       The size of the address bus of the microprocessor

Question No: 24    ( M a r k s: 1 )    http://vuzs.net
  
The expression F=A+B+C describes the operation of three bits _____ Gate.

       ► OR
       ► AND
       ► NOT
       ► NAND
   
Question No: 25    ( M a r k s: 1 )    http://vuzs.net
  
Stack is an acronym for _________

       FIFO memory
       LIFO memory
       Flash Memory
       Bust Flash Memory
   
Question No: 26    ( M a r k s: 1 )    http://vuzs.net
  
Addition of two octal numbers “36” and “71” results in ________

       213
       123
       127
       345


   
Question No: 27    ( M a r k s: 2 )
  
Define quantization process.




    
Question No: 28    ( M a r k s: 2 )
Explain the difference between 1-to-4 Demultiplexer and 2-to-4 Binary Decoder? 

Question No: 29    ( M a r k s: 2 )
 
A general Sequential circuit consists of a combinational circuit and a memory element. How this memory element is implemented

Question No: 30    ( M a r k s: 2 )
 
Suppose a 2 bit up-counter, having states A, B, C, D. Write down GOTO statements to show how present states change to next states.

Question No: 31    ( M a r k s: 3 )
  
Name three Operations that can be performed on FLASH Memory

   
Question No: 32    ( M a r k s: 3 )
  
Explain Rotate Right Operation of shift register with the help of diagram.
    
Question No: 33    ( M a r k s: 3 )
 

You are given the block diagram of 74HC190 integrated circuit up/down counter, explain the function of labeled inputs/outputs.


Question No: 34    ( M a r k s: 5 )
 
 Draw the state diagram of 3-bit up-down counter, use an external input X, when X sets to logic 1, the counter counts downwards, otherwise upward.
   
Question No: 35    ( M a r k s: 5 )
 Differentiate between synchronous and asynchronous RAM.
Question No: 36    ( M a r k s: 5 )
Explain Memory Select or Enable Signals
Related Posts Plugin for WordPress, Blogger...